logo

Takplastguiden

With this calculation tool you can easily estimate the complete consumption of material for gop Multiglas twinwall roof. When you have entered your specifications and requirements you will get a quote basis that you can print and take to your nearest retailer.

Read more about gop Multiglas
Find a retailer

Step 1 - Roof design

The calculation of a gop Multiglas twin wall roof is made in five simple steps. Choose Next to proceed to the next step.

Start the calculation by choosing your roof type: shed roof or gable roof.

Shed roof

Gable roof

Step 2 - Color and thickness

Select color and thickness of the roof.

Have this in mind when planning your roof:

gop Multiglas 10 mm is mostly used for basic conservatories and patios. The sheet is available in opal white in width 1050 mm. Note that the construction requires a narrower framework than 16 and 32 mm.

gop Multiglas 16 mm is the most common thickness. The roof is able to keep the temperature during spring, summer and autumn with temporary heating options. The sheet is available as opal white in widths of 980 and 1200 mm and clear or bronze in width 980 mm.

gop Multiglas 32 and 50 mm is the best option for a winter garden or insulated conservatories. The sheets are available in width 1200 mm. 32 mm is available in opal white and bronze. 50 mm is available in opal white.

Read more about gop Multiglas Kanaltak

10 mm opal white Light transmission 50% U-Value 2,5W/m2K
16 mm clear Light transmission 66% U-Value 2,0W/m2K
16 mm opal white Light transmission 54% U-Value 2,0W/m2K
16 mm bronze Light transmission 40% U-Value 2,0W/m2K
32 mm opal white Light transmission 39% U-Value 1,1W/m2K
32 mm bronze Light transmission 32% U-Value 1,1W/m2K
50 mm opal white Light transmission 28% U-Value 0,84W/m2K

Step 3 - Dimensions

Select preferred width and length of the sheets. Then select the width of the roof.

Have this in mind when planning your roof:

10, 16 and 32 mm
CC metric of the framework depends of the width of the sheet as follows:
Sheet width + 35 mm = CC spacing of the studs.
Brochure and assembly instructions

50 mm
CC distance of the studs = 1220 mm
Brochure and assembly instructions

Step 4 - Accessories

We offer a well-developed system of accessories that extend the roof's lifespan and simplify installation, e.g. white aluminum profiles with pre-mounted rubber strip, drainage tape and mounting screws. The accessories listed below are optional accessories that can be added to your specification.

Wall connector

To attach the roof construction to the house we recommend using a wall connector. The wall connector prevents water dripping in between sheet and wall.

Weather strip 6 m

The weather strip seals and adds extra insulation between beams and sheets. See assembly instruction for more information.

Step 5 - Roof specification

Find a retailer
Read more about gop Multiglas Kanaltak